Description
- PROFESSIONAL GRAIN MILLThe grain mill is professional in grinding barley, wheat and other cereals. It is provided with adjustable 2 rollers which can be crushed cereal well and peeled shell off perfectly, so as to be good for brewing beer in future. The 2 rollers design has the main advantage that it draws the grain better and gives improved throughput. Width and roller diameter is optimized for use with power drill.
- QUALITY MATERIALSThis grain mill grinder is constructed using heavy duty materials. Cold rolled steel rollers, aluminum body and stainless steel hopper and SAE 841 oil impregnated brass bushings. It comes with a hopper that can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on oil-impregnated bronze bushings.
- ADJUSTABLE TWO ROLLERSHeavy-duty two-roller mill with adjustable secondary gap-spacing. Stainless knurled knobs allow a gap spacing adjustment range of 0.07". Fully adjustable mill, 6" long adjustable gap, 0.06" fixed primary gap, 0-0.065" fully-adjustable secondary gap. Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws.
- INTEGRAL DRIVE SHAFT & AXLESThe drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible. A hand crank is included, but the mill can be easily motorized with a corded electric drill. You don't need any additional attachments, just stick the drill on and go. Mill can be hand-cranked or motorized with a corded electric drill.
- HIGH EFFICIENCY MILLINGThis machine is perfect for large batches and high efficiency milling. With two rollers, all your grain will be crushed twice in one cycle. The crush is through the fixed gap between the top two rollers. The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.
Specifications:
Type: Grain Crusher
Color: Silver
2 Rollers: Stainless Steel
Grinder Housing: Aluminum
Hoppers: Stainless Steel, 4 Liters = 1 Gallon
Speed: 8 lbs/min
Total Height: 10"
Hopper Dimensions at Top: 8.7" x 8.3"
Footprint Size of Grinder: 5.5" x 3"
Roller Dimension: 3" x 6" x 2"
Single Roller: 1.5" x 6"
Roller Adjustable: 0-0.1"
Crank Handle: 4.7"
Package Size: 20" x 10" x 8"
Shipping Weight: 18 lbs
Features:
Durable alloy frame
With 2 aluminum bars
Integral drive shaft and axles
6" x 1.5" diameter stainless steel rollers
SAE 841 oil impregnated bronze bushings
Dual eccentric adjusters built from stainless steel for no galling
Fully adjustable mill
Heavy-duty two-roller mill with adjustable secondary gap-spacing
The ribbed rollers are adjustable at both ends of the slot
Crankshaft can be turned clockwise or counterclockwise
Mill can be hand-cranked or motorized with a corded electric drillWidth and roller diameter is optimized for use with power drill
Adjustable rollers at both ends to give uniform crush
12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
6" long adjustable gap
0.06" fixed primary gap, 0-0.065" fully-adjustable secondary gap
8 lbs per minute is average throughput
Package Includes:
2 x Aluminum Bars
1 x Malt Mill
1 x Hopper
1 x Crank Handle
1 x Some Accessories
Note:
This item cannot grind soybeans and corn.
You will need to build a base to set the mill over a grain bin or 5 gallon bucket.